RU

Spoofer UBGG Temp setup

Game guidesSpoofer Updated12 July 2026
Updating Advanced setup
Download Loader Defender Control Visual C++ Runtimes Buy Spoofer UBGG Temp — from $5.55

A HWID spoofer with no menu: it changes hardware IDs, and the serials before and after show the result.

Requirements

0 of 2 items

Tick what matches your PC:

  • Windows 10 or 11 (x64)
  • Back up your data — spoofing changes hardware IDs

System requirements

  • Operating system Windows 10 or 11 All builds except 26H2
  • Processor Intel or AMD
  • Graphics card Any
  • Game mode Any
  • Launchers Any
  • Built-in spoofer Yes
You will also need Not included in the purchase — have it ready before you pay
  • Windows reinstall For ACE / Arena Breakout

Preparation

Turn off Windows protection — that's enough for most systems.
0 of 9 steps
Remove third-party antivirus and anti-cheats Kaspersky, Avast, ESET and the like, plus FaceIT and Riot Vanguard, conflict with the loader. They must be uninstalled, not just paused.
  1. Open Settings → Apps → Installed apps (or Control Panel → Programs and Features).
  2. Uninstall any third-party antivirus (Kaspersky, Avast, AVG, ESET, 360, Malwarebytes, etc.). Pausing or disabling is not enough — the antivirus driver stays resident.
  3. Uninstall the FaceIT AC and Riot Vanguard anti-cheats if present — they block third-party software at the kernel level.
    • FaceIT is the CS2 anti-cheat, Vanguard is the Valorant one. If you don't play those games, they are safe to remove.
After removing an antivirus, restart the PC — some of its services only unload after a reboot.
A full walkthrough covering every case: How to turn off Windows Defender in Windows 11 and 10: fully or for one folder
Fully disable Windows Defender The #1 cause of “it won't launch”. Disable it for real: manually first, then remove it from startup, reboot, and finish it off with Defender Control.
  1. Step 1. Turn protection off by hand. Open Windows Security → Virus & threat protection → Manage settings and switch every toggle off:
    • Real-time protection — Off.
    • Cloud-delivered protection — Off.
    • Automatic sample submission — Off.
    • Tamper Protection — Off. Turn this one off first, otherwise the others switch themselves back on.
  2. Step 2. Disable reputation-based protection. In Windows Security → App & browser control → Reputation-based protection → Settings, turn everything off (SmartScreen, potentially-unwanted-app blocking).
  3. Step 3. Remove Defender from startup. Open Task Manager (Ctrl+Shift+Esc) → Startup apps tab, find Windows Security notification icon and click Disable.
  4. Step 4. Restart your computer. This is mandatory — some Defender services only unload after a reboot.
  5. Step 5. Finish with Defender Control. Download Defender Control (archive password: r1xon), run it as administrator and click Disable Windows Defender — the tile turns red.
    • If your antivirus deletes the utility itself, protection is still active — go back to step 1. The file ships zipped on purpose so Defender can't wipe it before it's disabled.
Don't skip steps 3–4. “I turned the toggles off but it didn't help” almost always means Defender came back after restart because it was left in startup.
A full walkthrough covering every case: How to turn off Windows Defender in Windows 11 and 10: fully or for one folder
  1. Close games, launchers and all anticheats.
  2. Install Visual C++ Runtimes if they are missing.
  3. Reboot the PC after changing system protection settings.
  4. Seed defines which HWID set will be used during spoofing.
  5. If you play on the same new account, keep the same seed so the HWID looks stable between sessions.
  6. If you receive a ban, always change the seed before the next launch.
  7. Do not share your seed with other users.

Launch

0 of 9 steps
Playing with a cheat? Launch the cheat first and only then the spoofer. Otherwise the cheat key loses its binding to your hardware.
  1. Download Loader and run it as administrator.
  2. Log into your account or activate the key received after purchase.
  3. Before first launch, click Clean, even if Windows was installed recently.
  4. Wait for cleaning to finish without launching games.
  5. Click Spoof and wait for successful completion.
  6. On first use, reboot if the loader asks for it, then spoof again.
  7. Open Serial Checker and compare values before and after spoofing.
  8. Close the loader before launching the game.
  9. Launch the game only after successful spoofing and checking.

Problems & fixes

6
BSOD during spoofing
Check that VPN is off, Hyper-V/VBS/NX Mode are disabled and antiviruses are not running. Reboot the PC and repeat the process from the beginning.
Serial numbers returned after reboot
This is normal for a temporary spoofer. Run Spoof again after every reboot.
ACE / Arena Breakout keeps banning
ACE / Arena Breakout requires Windows reinstall. Also use a new account and do not skip cleaning before spoofing.
Loader does not start
Run as administrator, disable Defender through Defender Control, install Visual C++ Runtimes and make sure VPN is off during spoofing.
Need stable HWID between sessions
Use the same seed for the same account. If the account is banned, change the seed before the next run.
More launch tips
  • UBGG Temp is a temporary hypervisor spoofer. After reboot, spoofing must be performed again.
  • ACE / Arena Breakout requires Windows reinstall before use.
  • Disable VPN during spoofing itself. You can enable VPN again after successful spoofing.
  • Do not put the PC into sleep mode expecting the spoof to stay stable.
  • Do not click Clean every time without need: frequent cleaning may look suspicious.
  • Repeat Spoof after every reboot if you plan to continue playing.
  • The loader must be closed before launching the game.
  • Use a new account after successful spoofing.
  • If the game uses ACE / Arena Breakout, reinstall Windows first.

Advanced setup — only if it still won’t launch

Disable Secure Boot Secure Boot stops the loader from starting. Check the status first, then disable it in BIOS if needed.
  1. Check the status: press Win + R, type msinfo32, and in System Summary find Secure Boot State. If it reads Off or Unsupported — you're set, skip the rest.
  2. If it's On — enter BIOS/UEFI (tap Del, F2 or F10 while the PC boots — depends on the motherboard).
  3. Find Boot or Security → Secure Boot and set it to Disabled. Save (usually F10) and reboot.
    • If Secure Boot is greyed out, set a Supervisor Password under Security first — that unlocks the option. You can remove the password afterwards.
A full walkthrough covering every case: How to disable Secure Boot: ASUS, MSI, Gigabyte, ASRock and laptops
Enable virtualization (VT-x / SVM) The loader needs hardware CPU virtualization. Enabled in BIOS.
  1. Enter BIOS/UEFI and open Advanced → CPU Configuration (naming varies by board).
  2. Enable Intel Virtualization Technology (VT-x) on Intel, or SVM Mode on AMD. Save and reboot.
A full walkthrough covering every case: How to enable virtualization in BIOS: Intel VT-x and AMD SVM
Disable Hyper-V and Windows virtualization Windows' own virtualization features grab the hypervisor and get in the loader's way. Disabled separately from VT-x.
  1. Open Control Panel → Programs → Turn Windows features on or off and uncheck Hyper-V, Virtual Machine Platform and Windows Hypervisor Platform.
  2. Open Command Prompt as administrator, run the command, then reboot:
    bcdedit /set hypervisorlaunchtype off
  3. Also turn off Memory Integrity and Application Guard if enabled (see “Disable Core Isolation”).
A full walkthrough covering every case: Core Isolation in Windows 11 and 10: what it is and how to turn it off
Disable Core Isolation Memory Integrity blocks the driver from loading. Takes a minute to switch off.
  1. Open Windows Security → Device security → Core isolation details.
  2. Turn off Memory Integrity and restart the PC.
A full walkthrough covering every case: Core Isolation in Windows 11 and 10: what it is and how to turn it off
Disk in GPT layout If the loader says “Unsupported firmware”, the system disk is MBR and needs converting to GPT.
  1. Check the layout: Win+R → diskmgmt.msc, right-click the system disk → Properties → Volumes → Partition style. It should read GUID (GPT).
  2. If it's MBR, convert without data loss: admin Command Prompt, run mbr2gpt /convert /allowfullOS. After converting, switch the BIOS boot mode to UEFI.
Back up anything important before converting. It usually goes smoothly, but a disk is a disk.
Disable Intel RST (Rapid Storage) On some laptops Intel RST mode gets in the loader's way. Switched to AHCI in BIOS.
  1. In BIOS find SATA Mode / Storage Configuration and switch from Intel RST / RAID to AHCI. Save and reboot.
If Windows won't boot after switching to AHCI, boot into Safe Mode once — Windows picks up the AHCI driver, then reboot normally.
Use a VPN for download and activation CIS ISPs often block the activation servers. A VPN is needed while downloading the loader, activating the key and injecting — you can turn it off before joining a match.
  1. Use a full VPN — an app that routes all traffic, not a browser proxy or extension: half the support tickets come from exactly this. In Happ and similar clients turn on TUN mode.
  2. Turn the VPN on before downloading the loader and activating the key. If something won't load, switch country (Europe or the US usually work).
  3. After a successful inject you can turn the VPN off before the match to avoid extra ping.
A VPN fixes most endless-loading and “key won't activate” problems.
No VPN of your own? Get R1XON VPN from us, from $2.09, for PC and phone
Update Visual C++ and DirectX Up-to-date runtimes keep the loader and overlay from crashing at start.
  1. Install Visual C++ Redistributable x64 and restart the PC.
  2. Update DirectX if you haven't in a while.

FAQ

1
Where do I get the key after payment?
The key arrives instantly after payment — it appears on the order page and lands in your email, and if Telegram is linked to your account, our bot sends a copy too. This guide opens from there as well.

Still stuck?

Run R1XON Checker first — it pinpoints most launch problems in 30 seconds. If it still fails, attach the checker report to your support ticket and we’ll sort it out fast.

Download R1XON Checker Contact support