RU

Spoofer ABI setup

Game guidesSpoofer Updated14 October 2026
Working Advanced setup
Download Loader Buy Spoofer ABI — from $4.93

A HWID spoofer for Arena Breakout: Infinite: it swaps hardware serials until the PC reboots. It doesn't lift an account ban — play on a new account.

Requirements

0 of 4 items

Tick what matches your PC:

  • Windows 10 or 11 (x64), build 1903 to 26H2
  • A USB flash drive: the launcher runs from it, a virtual one works too
  • Virtualization (VT-x / SVM) enabled in BIOS, Hyper-V disabled
  • A fresh game account: the spoofer can't help an account that is already banned

System requirements

  • Operating system Windows 10 or 11 Builds 1903 – 26H2
  • Processor Intel or AMD
  • Graphics card NVIDIA or AMD
  • Game mode Any
  • Launchers Any
  • Built-in spoofer Yes
You will also need Not included in the purchase — have it ready before you pay
  • USB flash drive The spoofer runs from it
  • Windows reinstall May be needed: if bans keep coming

Preparation

The spoofer needs virtualization on and Hyper-V off; antivirus, Defender and SmartScreen block the launcher. Done once.
0 of 7 steps
Remove third-party antivirus and anti-cheats Kaspersky, Avast, ESET and the like, plus FaceIT and Riot Vanguard, conflict with the loader. They must be uninstalled, not just paused.
  1. Open Settings → Apps → Installed apps (or Control Panel → Programs and Features).
  2. Uninstall any third-party antivirus (Kaspersky, Avast, AVG, ESET, 360, Malwarebytes, etc.). Pausing or disabling is not enough — the antivirus driver stays resident.
  3. Uninstall the FaceIT AC and Riot Vanguard anti-cheats if present — they block third-party software at the kernel level.
    • FaceIT is the CS2 anti-cheat, Vanguard is the Valorant one. If you don't play those games, they are safe to remove.
After removing an antivirus, restart the PC — some of its services only unload after a reboot.
A full walkthrough covering every case: How to turn off Windows Defender in Windows 11 and 10: fully or for one folder
Fully disable Windows Defender The #1 cause of “it won't launch”. Disable it for real: manually first, then remove it from startup, reboot, and finish it off with Defender Control.
  1. Step 1. Turn protection off by hand. Open Windows Security → Virus & threat protection → Manage settings and switch every toggle off:
    • Real-time protection — Off.
    • Cloud-delivered protection — Off.
    • Automatic sample submission — Off.
    • Tamper Protection — Off. Turn this one off first, otherwise the others switch themselves back on.
  2. Step 2. Disable reputation-based protection. In Windows Security → App & browser control → Reputation-based protection → Settings, turn everything off (SmartScreen, potentially-unwanted-app blocking).
  3. Step 3. Remove Defender from startup. Open Task Manager (Ctrl+Shift+Esc) → Startup apps tab, find Windows Security notification icon and click Disable.
  4. Step 4. Restart your computer. This is mandatory — some Defender services only unload after a reboot.
  5. Step 5. Finish with Defender Control. Download Defender Control (archive password: r1xon), run it as administrator and click Disable Windows Defender — the tile turns red.
    • If your antivirus deletes the utility itself, protection is still active — go back to step 1. The file ships zipped on purpose so Defender can't wipe it before it's disabled.
Don't skip steps 3–4. “I turned the toggles off but it didn't help” almost always means Defender came back after restart because it was left in startup.
A full walkthrough covering every case: How to turn off Windows Defender in Windows 11 and 10: fully or for one folder
Enable virtualization (VT-x / SVM) The loader needs hardware CPU virtualization. Enabled in BIOS.
  1. Enter BIOS/UEFI and open Advanced → CPU Configuration (naming varies by board).
  2. Enable Intel Virtualization Technology (VT-x) on Intel, or SVM Mode on AMD. Save and reboot.
A full walkthrough covering every case: How to enable virtualization in BIOS: Intel VT-x and AMD SVM
Disable Hyper-V and Windows virtualization Windows' own virtualization features grab the hypervisor and get in the loader's way. Disabled separately from VT-x.
  1. Open Control Panel → Programs → Turn Windows features on or off and uncheck Hyper-V, Virtual Machine Platform and Windows Hypervisor Platform.
  2. Open Command Prompt as administrator, run the command, then reboot:
    bcdedit /set hypervisorlaunchtype off
  3. Also turn off Memory Integrity and Application Guard if enabled (see “Disable Core Isolation”).
A full walkthrough covering every case: Core Isolation in Windows 11 and 10: what it is and how to turn it off
  1. Check your Windows build: press Win + R, type winver and press Enter. Supported builds: 1903 (18362), 1909 (18363), 2004 (19041), 20H2 (19042), 21H1 (19043), 21H2 (19044), 22H2 (19045), 21H2 (22000), 22H2 (22621), 23H2 (22631), 24H2 (26100), 25H2 (26200) and 26H2.
  2. The developer's [CA] FixMainError utility checks whether everything is off: run it as administrator, it shows what is still in the way and switches off what it can. Download it from the Failed to launch #2 topic.
  3. Restart your PC after all of the steps above.

Launch

0 of 9 steps
Playing with a cheat? Launch the cheat first and only then the spoofer. Otherwise the cheat key loses its binding to your hardware. If both the cheat and the spoofer are from Crooked, the order doesn't matter.
  1. Fully close the game and its launcher.
  2. If you ran another cheat or spoofer before, restart your PC.
  3. Download the Launcher and put it on the flash drive. Delete any old copies of the launcher from the PC.
  4. Run the Launcher from the flash drive and register. The launcher has its own accounts, Crooked forum credentials don't work there.
    • The password must be at least 6 characters. Email addresses on Cyrillic domains are not accepted.
    • Log in for the first time with no spoofer running, including other developers' ones. Otherwise the account binds to spoofed serials and after a restart the launcher says Hardware component has changed.
  5. Activate your key: click your nickname in the lower-left corner, paste the key and click Activate. The key's time starts counting from activation.
  6. Select HWID Spoofer Arena Breakout: Infinite and click Launch.
  7. Wait for the Launched button and the Successfully launched message: the spoofer is running. If the launcher shows an error instead, the spoofer did not load. Close the launcher and look the error up in the problems below.
  8. Close the Launcher and unplug the flash drive.
  9. Launch the game:
    • The spoofer lasts until the PC restarts: run it once per Windows session and again after every restart.
    If new accounts keep getting hardware-banned, the spoofer alone isn't enough: rename the PC, create a new Windows user and reset the network. Step by step in the problem “The spoofer is running, but the new account still gets banned”.

Problems & fixes

18
The spoofer is running, but the new account still gets banned
First check the basics: the spoofer was started after a restart, the launcher showed Launched, and the account is new rather than one that was already banned.

If all of that holds, the anti-cheat recognises the PC not only by hardware serials but by traces in Windows too: the computer name, the user profile, network settings. For this case the developer requires preparing the system again, strictly in this order:
  1. Rename the PC: Settings → System → About → Rename this PC. Restart the PC.
  2. Create a new Windows user and sign in with it: Settings → Accounts → Other users → Add account → “I don't have this person's sign-in information” → “Add a user without a Microsoft account”. Then use “Change account type” to make it an administrator.
  3. Reset the network while signed in as the new user: Win + I → Network & internet → Advanced network settings → Network reset (on Windows 10: Network & Internet → Status → Network reset). You may need to reinstall your VPN client afterwards.
  4. Restart the PC, register a new game account and run the spoofer as described above.

If bans still continue after that, in rare cases only a full Windows reinstall helps: a clean one that formats the system drive, not “Reset this PC”.
Hardware component has changed
The launcher binds the account to your hardware: 1 launcher account = 1 PC. The error means the serials changed: because of a spoofer, swapped components or a login from another computer.
  • If the spoofer is already running: restart the PC so it switches off, log in to the launcher and only then start the spoofer.
  • If you changed, added or rearranged components, the binding needs a reset. Send support your launcher account email, the key and what exactly changed in the PC. The developer resets a binding no more than once every two weeks, the key's time spent waiting is not refunded, and an extra reset or a reset after changing PCs is paid on their side.
Failed to launch #1 or #2
Something in the system is blocking the launch, most often security software.
  • Uninstall any third-party antivirus instead of just pausing it. Restart the PC and check that none of its services or drivers remain.
  • Turn off SmartScreen and Windows Defender.
  • Uninstall FACEIT Anti-Cheat and Riot Vanguard together with their leftovers: how to remove.
  • Close Discord and YouTube unblocking tools, streaming and screen recording software and any other background apps you don't need.
  • Run the [CA] FixMainError utility as administrator (download): it shows what is still in the way.
  • Once all of the above is done, turn on a VPN. If it doesn't help, try another one.
  • If the error remains: make sure virtualization is on while Hyper-V and Secure Boot are off, and turn off User Account Control (UAC).
The launcher doesn't start or creates an error log
Turn on a VPN and start the launcher again. If that doesn't help, uninstall the antivirus and turn off Defender and SmartScreen, as for the Failed to launch error.
Restart your system and try again Hyper-V
Hyper-V or its components are enabled in Windows.
  1. Run the [CA] FixMainError utility from the developer's topic as administrator: it switches off what's needed by itself. If that doesn't help, the same topic has the [CA] CheckParam checker.
  2. Manually: Win + R → optionalfeatures and untick Hyper-V, Virtual Machine Platform, Windows Hypervisor Platform, Windows Subsystem for Linux, Windows Sandbox and Microsoft Defender Application Guard. Turn off Core isolation (Windows Security → Device security).
  3. In PowerShell as administrator, run one by one:
bcdedit /set hypervisorlaunchtype off
reg add "HKLM\SYSTEM\CurrentControlSet\Control\DeviceGuard" /v EnableVirtualizationBasedSecurity /t REG_DWORD /d 0 /f
reg add "HKLM\SYSTEM\CurrentControlSet\Control\DeviceGuard\Scenarios\SystemGuard" /v Enabled /t REG_DWORD /d 0 /f
reg add "HKLM\SYSTEM\CurrentControlSet\Control\DeviceGuard\Scenarios\HypervisorEnforcedCodeIntegrity" /v Enabled /t REG_DWORD /d 0 /f
dism.exe /online /disable-feature /featurename:Microsoft-Windows-Subsystem-Linux
dism.exe /online /disable-feature /featurename:VirtualMachinePlatform
dism.exe /online /disable-feature /featurename:Microsoft-Hyper-V-All
Restart the PC.
  1. On Windows 11 24H2 and 25H2 this must be followed by a Microsoft tool: download the Device Guard and Credential Guard hardware readiness tool and unzip it. In PowerShell as administrator go to its folder (cd path_to_folder), run Set-ExecutionPolicy Unrestricted -Scope Process, then .\DG_Readiness_Tool_v3.6.ps1 -Disable (use your version number if it differs). Restart; if Windows asks for confirmation during boot (for example F3), confirm.
  2. After the restart run bcdedit /set hypervisorlaunchtype off once more and restart. If the error is still there, run Disable-WindowsOptionalFeature -Online -FeatureName Microsoft-Hyper-V-Hypervisor and restart again.
Black screen in game
Launch the game through the official Arena Breakout launcher, not through Steam.
Your IP address has been blocked
Three failed launcher logins block your IP for 15 minutes. Wait 15 minutes and enter your email and password carefully, or recover the password. The same error appears when logging in from another PC: a launcher account only works on the computer it is bound to.
Failed to launch #4
  • Turn off Windows test mode if it's on: Command Prompt as administrator → bcdedit /set testsigning off, then restart.
  • Enable the Secondary Logon service: Win + R → services.msc → right-click the service → Properties → Startup type Automatic → OK.
  • Uninstall the antivirus, turn off SmartScreen and Defender, remove FACEIT and Vanguard with their leftovers.
  • Close MSI Afterburner and Discord and YouTube unblocking tools.
  • Turn on a VPN, and if your ISP blocks access, change DNS.

Advanced setup — only if it still won’t launch

Disable Secure Boot Secure Boot stops the loader from starting. Check the status first, then disable it in BIOS if needed.
  1. Check the status: press Win + R, type msinfo32, and in System Summary find Secure Boot State. If it reads Off or Unsupported — you're set, skip the rest.
  2. If it's On — enter BIOS/UEFI (tap Del, F2 or F10 while the PC boots — depends on the motherboard).
  3. Find Boot or Security → Secure Boot and set it to Disabled. Save (usually F10) and reboot.
    • If Secure Boot is greyed out, set a Supervisor Password under Security first — that unlocks the option. You can remove the password afterwards.
A full walkthrough covering every case: How to disable Secure Boot: ASUS, MSI, Gigabyte, ASRock and laptops
Disable Core Isolation Memory Integrity blocks the driver from loading. Takes a minute to switch off.
  1. Open Windows Security → Device security → Core isolation details.
  2. Turn off Memory Integrity and restart the PC.
A full walkthrough covering every case: Core Isolation in Windows 11 and 10: what it is and how to turn it off
Disk in GPT layout If the loader says “Unsupported firmware”, the system disk is MBR and needs converting to GPT.
  1. Check the layout: Win+R → diskmgmt.msc, right-click the system disk → Properties → Volumes → Partition style. It should read GUID (GPT).
  2. If it's MBR, convert without data loss: admin Command Prompt, run mbr2gpt /convert /allowfullOS. After converting, switch the BIOS boot mode to UEFI.
Back up anything important before converting. It usually goes smoothly, but a disk is a disk.
Use a VPN for download and activation CIS ISPs often block the activation servers. A VPN is needed while downloading the loader, activating the key and injecting — you can turn it off before joining a match.
  1. Use a full VPN — an app that routes all traffic, not a browser proxy or extension: half the support tickets come from exactly this. In Happ and similar clients turn on TUN mode.
  2. Turn the VPN on before downloading the loader and activating the key. If something won't load, switch country (Europe or the US usually work).
  3. After a successful inject you can turn the VPN off before the match to avoid extra ping.
A VPN fixes most endless-loading and “key won't activate” problems.
No VPN of your own? Get R1XON VPN from us, from $2.09, for PC and phone
Update Visual C++ and DirectX Up-to-date runtimes keep the loader and overlay from crashing at start.
  1. Install Visual C++ Redistributable x64 and restart the PC.
  2. Update DirectX if you haven't in a while.

FAQ

5
Where do I get the key after payment?
The key arrives instantly after payment — it appears on the order page and lands in your email, and if Telegram is linked to your account, our bot sends a copy too. This guide opens from there as well.
Will the spoofer lift the ban from my account?
No. The spoofer only removes the hardware ban, and only while it is running: after a PC restart the real serials come back. A banned account stays banned, so play on a new one. The developer only guarantees the spoofer on an account that has never been banned before.
Do I need to run the spoofer every time?
Once per Windows session. The spoofer lasts until the PC restarts, after which the real serials return and you run it again before playing. There's no need to run it twice without a restart.
In what order do I start the spoofer and a cheat?
Restart the PC, start the cheat, then the spoofer. If both products are from Crooked, the order doesn't matter. Officially the developer only guarantees compatibility with their own products, so if something won't start with a particular cheat, contact support.
Can I use the key on two PCs?
No. On the first login the launcher account binds to the computer, and on another PC the launcher answers Hardware component has changed. Moving to a new PC needs a binding reset through support.

Still stuck?

Run R1XON Checker first — it pinpoints most launch problems in 30 seconds. If it still fails, attach the checker report to your support ticket and we’ll sort it out fast.

Download R1XON Checker Contact support