Bleak setup for Rob Run

Game guidesRob Run Updated9 November 2026
Working Medium setup difficulty Menu key Right Shift
Loader link comes with your key Buy Bleak — from $4

Runs through the Discord overlay; Secure Boot and TPM stay as they are. Turn off Memory Integrity once, then it takes a couple of minutes: Discord, the loader, the key and F4 in game.

Requirements

0 of 5 items

Tick what matches your PC:

  • Windows 10 or 11 (x64)
  • Rob Run from Steam
  • Discord — it serves as the overlay, without it the menu will not appear
  • Secure Boot and TPM can stay on
  • Administrator rights on the PC

System requirements

  • Operating system Windows 10 or 11, x64
  • Processor Intel or AMD
  • Graphics card NVIDIA or AMD
  • Game mode Any
  • Launchers Steam
  • Built-in spoofer No

Preparation

Done once: Memory Integrity off and the Discord overlay set up. Remove antivirus and anti-cheats (FaceIT, Vanguard, 360, Avast); turning off Windows Defender is preferred.
0 of 8 steps
Remove third-party antivirus and anti-cheats Kaspersky, Avast, ESET and the like, plus FaceIT and Riot Vanguard, conflict with the loader. They must be uninstalled, not just paused.
  1. Open Settings → Apps → Installed apps (or Control Panel → Programs and Features).
  2. Uninstall any third-party antivirus (Kaspersky, Avast, AVG, ESET, 360, Malwarebytes, etc.). Pausing or disabling is not enough — the antivirus driver stays resident.
  3. Uninstall the FaceIT AC and Riot Vanguard anti-cheats if present — they block third-party software at the kernel level.
    • FaceIT is the CS2 anti-cheat, Vanguard is the Valorant one. If you don't play those games, they are safe to remove.
After removing an antivirus, restart the PC — some of its services only unload after a reboot.
A full walkthrough covering every case: How to turn off Windows Defender in Windows 11 and 10: fully or for one folder
Disable Core Isolation Memory Integrity blocks the driver from loading. Takes a minute to switch off.
  1. Open Windows Security → Device security → Core isolation details.
  2. Turn off Memory Integrity and restart the PC.
A full walkthrough covering every case: Core Isolation in Windows 11 and 10: what it is and how to turn it off
Fully disable Windows Defender The #1 cause of “it won't launch”. Disable it for real: manually first, then remove it from startup, reboot, and finish it off with Defender Control.
  1. Step 1. Turn protection off by hand. Open Windows Security → Virus & threat protection → Manage settings and switch every toggle off:
    • Real-time protection — Off.
    • Cloud-delivered protection — Off.
    • Automatic sample submission — Off.
    • Tamper Protection — Off. Turn this one off first, otherwise the others switch themselves back on.
  2. Step 2. Disable reputation-based protection. In Windows Security → App & browser control → Reputation-based protection → Settings, turn everything off (SmartScreen, potentially-unwanted-app blocking).
  3. Step 3. Remove Defender from startup. Open Task Manager (Ctrl+Shift+Esc) → Startup apps tab, find Windows Security notification icon and click Disable.
  4. Step 4. Restart your computer. This is mandatory — some Defender services only unload after a reboot.
  5. Step 5. Finish with Defender Control. Defender Control developer website — Sordum. Run the tool as administrator and click Disable Windows Defender — the tile turns red.
    • If your antivirus deletes the utility itself, protection is still active — go back to step 1. The file ships zipped on purpose so Defender can't wipe it before it's disabled.
Don't skip steps 3–4. “I turned the toggles off but it didn't help” almost always means Defender came back after restart because it was left in startup.
A full walkthrough covering every case: How to turn off Windows Defender in Windows 11 and 10: fully or for one folder
  1. Before changing BIOS or registry settings, back up important data and your BitLocker recovery key: turning protection off lowers the PC's security.
  2. Install Discord from discord.com/download.
  3. Close Discord completely and run it as administrator — every time from now on. Sign in or create an account.
  4. In Discord settings open Game Overlay.
  5. Before starting the game turn on Enable Overlay and turn off Enable Legacy Overlay. Match the rest to the screenshot.

Launch

0 of 7 steps
  1. Make sure Discord is running as administrator.
  2. Download the loader with the button at the top of the page and run it as administrator, every time.
  3. Wait for it to load, enter the key and press Inject — Rob Run starts by itself.
  4. In the game's main menu check that the Discord overlay is connected to Rob Run and the game toggle is on.
  5. A Discord notification in the top-left corner of the game also confirms it — then you can skip the settings.
  6. Return to the game, press F4 and wait 5–10 seconds — the menu opens by itself.
  7. After that the menu opens and closes with Right Shift. With the 9 November update the developer returns the standard Insert and Home: if Shift does not respond, press one of them.

Problems & fixes

5
REFUSED: reg_hvci=1 (HVCI pending in registry)
Memory Integrity has not fully turned off. Open the Registry Editor, go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\DeviceGuard\Scenarios\HypervisorEnforcedCodeIntegrity and set Enabled to 0. Restart the PC.
The Memory Integrity toggle is unavailable
Turn it off in the registry: in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\DeviceGuard\Scenarios\HypervisorEnforcedCodeIntegrity the Enabled value must be 0. Restart the PC after the change.
The loader does not start or closes right away
The loader only runs as administrator — the first time and every time after. If that does not help, Windows Defender or a third-party antivirus is blocking it: turn protection off using the guide above and uninstall the antivirus.
The menu does not appear after F4
It is almost always the Discord overlay. Discord must be running as administrator, and in Game Overlay the regular overlay is on, the legacy one is off, and Rob Run shows as active now. Press F4 and wait 5–10 seconds.
The loader does not accept the key
Paste the key by copying, with no spaces around it, and check that it is for Rob Run: keys for different Bleak games are not interchangeable. If it still does not work, contact our support.

FAQ

5
Which key opens the menu?
Right Shift for now. With the big 9 November update the developer moves the menu to the standard Insert or Home, so if Shift does not open it, press those. The first time after launch, press F4 in the game and wait 5–10 seconds; the menu opens by itself. Aiming pauses while the menu is open.
How is Full different from Lite?
Full has the aim. Lite has no aiming but keeps ESP, world objects, the radar, Battle Mode, the police alert and configs.
Do I need to turn off Secure Boot and TPM?
No, the developer's guide says it is optional. You must turn off Memory Integrity and remove antivirus and anti-cheats; turning off Windows Defender is preferred.
Where are the settings stored?
The menu saves changes by itself: the autosave is C:\Windows\System\bleak_robrun.json, profiles are in the folder C:\Windows\System\configs_bleak_robrun
Is the menu available in Russian?
Yes, the menu switches between English and Russian without a restart, item names included.

Still stuck?

Run R1XON Checker first — it pinpoints most launch problems in 30 seconds. If it still fails, attach the checker report to your support ticket and we’ll sort it out fast.