Aegis setup for Rob Run

Game guidesRob Run Updated15 November 2026
Working Medium setup difficulty Menu key Insert
Loader link comes with your key Buy Aegis — from $4.85

Aegis runs from a loader on a USB drive, and the key goes into the loader. Turn off Windows protection before downloading the loader.

Requirements

0 of 4 items

Tick what matches your PC:

  • Windows 10 or 11, all versions except 26H1 and 26H2
  • A USB drive: the loader runs only from it
  • Rob Run from Steam
  • Hyper-V turned off

System requirements

  • Operating system Windows 10 or 11 Builds up to 25H2 inclusive
  • Processor Intel or AMD
  • Graphics card NVIDIA or AMD
  • Game mode Borderless window
  • Launchers Steam
  • Built-in spoofer No
You will also need Not included in the purchase — have it ready before you pay
  • USB flash drive The loader runs from it

Preparation

0 of 5 steps
Remove third-party antivirus and anti-cheats Kaspersky, Avast, ESET and the like, plus FaceIT and Riot Vanguard, conflict with the loader. They must be uninstalled, not just paused.
  1. Open Settings → Apps → Installed apps (or Control Panel → Programs and Features).
  2. Uninstall any third-party antivirus (Kaspersky, Avast, AVG, ESET, 360, Malwarebytes, etc.). Pausing or disabling is not enough — the antivirus driver stays resident.
  3. Uninstall the FaceIT AC and Riot Vanguard anti-cheats if present — they block third-party software at the kernel level.
    • FaceIT is the CS2 anti-cheat, Vanguard is the Valorant one. If you don't play those games, they are safe to remove.
After removing an antivirus, restart the PC — some of its services only unload after a reboot.
A full walkthrough covering every case: How to turn off Windows Defender in Windows 11 and 10: fully or for one folder
Fully disable Windows Defender The #1 cause of “it won't launch”. Disable it for real: manually first, then remove it from startup, reboot, and finish it off with Defender Control.
  1. Step 1. Turn protection off by hand. Open Windows Security → Virus & threat protection → Manage settings and switch every toggle off:
    • Real-time protection — Off.
    • Cloud-delivered protection — Off.
    • Automatic sample submission — Off.
    • Tamper Protection — Off. Turn this one off first, otherwise the others switch themselves back on.
  2. Step 2. Disable reputation-based protection. In Windows Security → App & browser control → Reputation-based protection → Settings, turn everything off (SmartScreen, potentially-unwanted-app blocking).
  3. Step 3. Remove Defender from startup. Open Task Manager (Ctrl+Shift+Esc) → Startup apps tab, find Windows Security notification icon and click Disable.
  4. Step 4. Restart your computer. This is mandatory — some Defender services only unload after a reboot.
  5. Step 5. Finish with Defender Control. Defender Control developer website — Sordum. Run the tool as administrator and click Disable Windows Defender — the tile turns red.
    • If your antivirus deletes the utility itself, protection is still active — go back to step 1. The file ships zipped on purpose so Defender can't wipe it before it's disabled.
Don't skip steps 3–4. “I turned the toggles off but it didn't help” almost always means Defender came back after restart because it was left in startup.
A full walkthrough covering every case: How to turn off Windows Defender in Windows 11 and 10: fully or for one folder
  1. Turn off Memory Integrity and Reputation-based protection.
  2. Turn the protection off before downloading the loader: otherwise the file is deleted while still in Downloads.
  3. After a restart Windows may turn real-time protection back on. Turn it off again or add the loader folder to the exclusions.

Launch

0 of 8 steps
  1. Download the loader and move it onto a USB drive.
  2. Delete every copy of the loader from the PC: Downloads, Desktop, the unpacked archive. Then empty the Recycle Bin. A leftover copy causes the Bad HWID error.
  3. Run the loader from the USB drive as administrator. If the blue “Windows protected your PC” window appears, press More info, then Run anyway.
  4. Enter the activation key from the email or the order page.
  5. Wait for the message about a successful start. Do not run the loader a second time over an open one.
  6. Launch Rob Run through Steam and wait for the server to load.
  7. Open the menu with Insert. The tab icons are at the top: the eye is Player ESP, the marker is World ESP, the crosshair is Aim Assist, the gear is Misc. The menu and ESP language is set on the Misc tab.
  8. Set up the features and save a config: configs are created, saved and loaded right from the menu.

Problems & fixes

7
The loader closed by itself after the game started
Close the game completely, turn off Defender and the antivirus again and add the loader folder to the exclusions. Run the loader from the USB drive as administrator, then the game.
The aim does not lock on
On the Targets & Friends tab tick the targets you need and check that the player is not on your friend list. Check the activation mode, capture zone size and maximum distance.
The USB drive is not read or the loader does not run from it
Plug the drive straight into a USB port, not through a hub, and check that it opens in Explorer. Run the loader from the drive letter itself, not from a copy on drive C.
Synchronise time after entering the key
Open Settings → Time & language, turn on Set time automatically and press Sync now.
Connection error after entering the key
Run the loader with a VPN turned on.
Bad HWID
Usually copies of the loader are left on the PC: delete them. If there are none, ask support to reset the binding.
Virtualization error
BIOS usually stays untouched. Contact support and we will advise for your system.

Advanced setup — only if it still won’t launch

Disable Hyper-V and Windows virtualization Windows' own virtualization features grab the hypervisor and get in the loader's way. Disabled separately from VT-x.
  1. Open Control Panel → Programs → Turn Windows features on or off and uncheck Hyper-V, Virtual Machine Platform and Windows Hypervisor Platform.
  2. Open Command Prompt as administrator, run the command, then reboot:
    bcdedit /set hypervisorlaunchtype off
  3. Also turn off Memory Integrity and Application Guard if enabled (see “Disable Core Isolation”).
A full walkthrough covering every case: Core Isolation in Windows 11 and 10: what it is and how to turn it off
Disable Core Isolation Memory Integrity blocks the driver from loading. Takes a minute to switch off.
  1. Open Windows Security → Device security → Core isolation details.
  2. Turn off Memory Integrity and restart the PC.
A full walkthrough covering every case: Core Isolation in Windows 11 and 10: what it is and how to turn it off
Update Visual C++ and DirectX Up-to-date runtimes keep the loader and overlay from crashing at start.
  1. Install Visual C++ Redistributable x64 and restart the PC.
  2. Update DirectX if you haven't in a while.

FAQ

3
Is a USB drive needed?
Yes, the loader runs only from a USB drive. Delete every copy from the PC itself, otherwise you get the Bad HWID error.
Why does the aim skip some players?
Check the Targets & Friends tab: whether the targets you need are on and whether the player is on your friend list. With Ignore Friends & Party on, the aim leaves your own people alone.
Which key opens the menu?
Insert. The menu opens once Rob Run has loaded the server.

Still stuck?

Run R1XON Checker first — it pinpoints most launch problems in 30 seconds. If it still fails, attach the checker report to your support ticket and we’ll sort it out fast.