Covcheg ESP setup for Delta Force

Game guidesDelta Force Updated29 October 2026

The ESP runs from a flash drive and draws through OBS 25.0.8 and RivaTuner. BIOS needs virtualization, UEFI and Secure Boot off.

Requirements

0 of 4 items

Tick what matches your PC:

  • Windows 10 22H2 or Windows 11 (x64)
  • An Intel or AMD CPU with virtualization
  • UEFI boot mode, system disk in GPT
  • A USB flash drive — the loader runs from it

System requirements

  • Operating system Windows 10 or 11 Builds 22H2 – 25H2
  • Processor Intel or AMD
  • Graphics card NVIDIA or AMD
  • Game mode Any
  • Launchers Steam
  • Built-in spoofer No
You will also need Not included in the purchase — have it ready before you pay
  • USB flash drive Needed to launch
  • OBS Studio 25.0.8 Exactly this version, remove a newer one

Preparation

0 of 7 steps
Enable virtualization (VT-x / SVM) The loader needs hardware CPU virtualization. Enabled in BIOS.
  1. Enter BIOS/UEFI and open Advanced → CPU Configuration (naming varies by board).
  2. Enable Intel Virtualization Technology (VT-x) on Intel, or SVM Mode on AMD. Save and reboot.
A full walkthrough covering every case: How to enable virtualization in BIOS: Intel VT-x and AMD SVM
Enable Hyper-V Needed when the product requirements say Hyper-V must be on. Enabled in Windows features.
  1. Open Control Panel → Programs → Turn Windows features on or off and tick Hyper-V with all its sub-items.
  2. Open Command Prompt as administrator, run the command, then reboot:
    bcdedit /set hypervisorlaunchtype auto
Disk in GPT layout If the loader says “Unsupported firmware”, the system disk is MBR and needs converting to GPT.
  1. Check the layout: Win+R → diskmgmt.msc, right-click the system disk → Properties → Volumes → Partition style. It should read GUID (GPT).
  2. If it's MBR, convert without data loss: admin Command Prompt, run mbr2gpt /convert /allowfullOS. After converting, switch the BIOS boot mode to UEFI.
Back up anything important before converting. It usually goes smoothly, but a disk is a disk.
Disable Secure Boot Secure Boot stops the loader from starting. Check the status first, then disable it in BIOS if needed.
  1. Check the status: press Win + R, type msinfo32, and in System Summary find Secure Boot State. If it reads Off or Unsupported — you're set, skip the rest.
  2. If it's On — enter BIOS/UEFI (tap Del, F2 or F10 while the PC boots — depends on the motherboard).
  3. Find Boot or Security → Secure Boot and set it to Disabled. Save (usually F10) and reboot.
    • If Secure Boot is greyed out, set a Supervisor Password under Security first — that unlocks the option. You can remove the password afterwards.
A full walkthrough covering every case: How to disable Secure Boot: ASUS, MSI, Gigabyte, ASRock and laptops
  1. Check that virtualization is on: Task Manager → Performance → CPU, the Virtualization line should read Enabled.
  2. Set the BIOS boot mode to UEFI (guide).
  3. If Hyper-V is missing from the list, download the bat file, run it as administrator and restart the PC.

Launch

0 of 15 steps
  1. Download the loader and move it to a USB flash drive. No copy of the loader should stay in Downloads or other folders.
  2. Run the loader from the flash drive and wait for its menu.
  3. Press Click to restart. The loader offers to restart the system — press Yes, the PC restarts on its own.
  4. After the restart install OBS Studio 25.0.8 even if you already have OBS, and do not update it.
  5. Run OBS as administrator.
  6. Run the loader from the flash drive and press Start.
  7. Wait for the “Start the game and press F5 in game main menu” box, physically unplug the flash drive and press OK.
  8. In RivaTuner move On-Screen Display zoom all the way left and put the frame counter in the top left corner.
  9. In Display palette move the alpha channel all the way left.
  10. Launch Delta Force in windowed mode.
  11. In OBS double-click Game Capture and choose Capture specific window.
  12. Pick the Delta Force process and press OK — the game must be running at this point.
  13. Wait until the game picture shows up in the OBS window.
  14. Press F5 once in the game main menu, without holding it.

Problems & fixes

2
Change game window mode and press F5 again
Switch the in-game display mode to any other (fullscreen, borderless or windowed) and press Apply. You can switch back right after, but before pressing F5 again. Then press F5 in the main menu once more.
Found running anti-cheat
Download the bat file, run it as administrator, then run the loader again.

FAQ

1
What does it need to run?
The cheat runs through a hypervisor: virtualization and UEFI mode on in BIOS, Secure Boot off, Hyper-V enabled in Windows and a GPT system disk. The loader runs from a USB flash drive, and OBS Studio 25.0.8 and RivaTuner are also required.

Still stuck?

Run R1XON Checker first — it pinpoints most launch problems in 30 seconds. If it still fails, attach the checker report to your support ticket and we’ll sort it out fast.