A radar with no in-game menu: the loader runs on the PC and the map opens in a browser on any device.
Requirements
Tick what matches your PC:
- Windows 10 or 11 (x64), builds 1909–26H2
- 16 GB of RAM, SVM/VT-X virtualisation on, Hyper-V and Secure Boot off
- A phone, tablet or second PC for the radar — optional
System requirements
- Operating system Windows 10 or 11 Builds 1909 – 26H2
- Processor Intel or AMD
- Graphics card NVIDIA or AMD
- Game mode Borderless window or windowed
- Launchers Steam, Epic Games or Microsoft Store
- Built-in spoofer No
Preparation
Remove third-party antivirus and anti-cheats Kaspersky, Avast, ESET and the like, plus FaceIT and Riot Vanguard, conflict with the loader. They must be uninstalled, not just paused.
- Open Settings → Apps → Installed apps (or Control Panel → Programs and Features).
- Uninstall any third-party antivirus (Kaspersky, Avast, AVG, ESET, 360, Malwarebytes, etc.). Pausing or disabling is not enough — the antivirus driver stays resident.
- Uninstall the FaceIT AC and Riot Vanguard anti-cheats if present — they block third-party software at the kernel level.
- FaceIT is the CS2 anti-cheat, Vanguard is the Valorant one. If you don't play those games, they are safe to remove.
Fully disable Windows Defender The #1 cause of “it won't launch”. Disable it for real: manually first, then remove it from startup, reboot, and finish it off with Defender Control.
- Step 1. Turn protection off by hand. Open Windows Security → Virus & threat protection → Manage settings and switch every toggle off:
- Real-time protection — Off.
- Cloud-delivered protection — Off.
- Automatic sample submission — Off.
- Tamper Protection — Off. Turn this one off first, otherwise the others switch themselves back on.
- Step 2. Disable reputation-based protection. In Windows Security → App & browser control → Reputation-based protection → Settings, turn everything off (SmartScreen, potentially-unwanted-app blocking).
- Step 3. Remove Defender from startup. Open Task Manager (Ctrl+Shift+Esc) → Startup apps tab, find Windows Security notification icon and click Disable.
- Step 4. Restart your computer. This is mandatory — some Defender services only unload after a reboot.
- Step 5. Finish with Defender Control. Download Defender Control (archive password: r1xon), run it as administrator and click Disable Windows Defender — the tile turns red.
- If your antivirus deletes the utility itself, protection is still active — go back to step 1. The file ships zipped on purpose so Defender can't wipe it before it's disabled.
- Make sure your system meets the requirements: SVM/VT-X enabled in BIOS, Windows 10-11 x64, at least 16 GB RAM.
- Turn Hyper-V and Secure Boot off: Ancient Radar only runs with both disabled.
- Before launching, turn on one overlay: NVIDIA App or SteelSeries GG.
- NVIDIA App works on Nvidia graphics cards only; on AMD only SteelSeries GG works.
- Close the other overlays: Steam, MSI Afterburner, Overwolf.
- If you use NVIDIA App, turn the overlay on download NVIDIA App:
- Open the settings and go to Generals.
- Turn on IN-GAME OVERLAY.
- NVIDIA App does not support fullscreen — run the game borderless or windowed.
- If you chose SteelSeries GG, install and set it up download SteelSeries GG:
- Open GENERAL → General and turn on Sonar.
- Go to SONAR → Shortcuts.
- Bind Master — Volume Up to a key, for example
F7. - Press this key before injection.
Launch
- Download the loader — download the loader.
- Run the loader as administrator.
- Paste your key.
- Press Inject.
- The loader closes by itself after injection.
- Once the loader has closed, start Delta Force.
- The radar opens in your browser. You can open the link on a phone or send it to a teammate.
Problems & fixes
22Please launch SteelSeries Moment Overlay (GeForce)
The menu does not appear with the NVIDIA App overlay
Please launch SteelSeries Sonar Overlay (SteelSeries)
Flickering menu or black screens
Please disable Intel Rapid Storage Technology
The bind button does not work
Menu does not appear or the Loader closes immediately
Unsupported Firmware
Error 0x296
Unknown network error
Failed to allocate memory / Failed to map memory
Failed to load dependencies / Make sure all antiviruses are disabled
Please uninstall Vanguard / FaceIT first
AES instruction set is not supported
Please enable Intel VT-X / AMD-V in BIOS
VMX/SVM is not supported
bcdedit /set hypervisorlaunchtype off in an administrator Command Prompt and restart.Either virtual or RAID disk is present
CRD failed at XXX / Failed to init render
Incorrect HWID
wmic diskdrive get Caption, SerialNumber, then wmic baseboard get SerialNumberIf the commands fail or return no serial numbers, Windows/WMI is broken — use an official Windows build. If serials are shown, send the key and an error screenshot to support.
The map does not load even though Connected is shown
No loot on the radar
The radar says you are not in a match
Nothing matches. Run R1XON Checker or write to support — we will sort it out.
Advanced setup — only if it still won’t launch
Disable Secure Boot Secure Boot stops the loader from starting. Check the status first, then disable it in BIOS if needed.
- Check the status: press
Win + R, typemsinfo32, and in System Summary find Secure Boot State. If it reads Off or Unsupported — you're set, skip the rest. - If it's On — enter BIOS/UEFI (tap
Del,F2orF10while the PC boots — depends on the motherboard). - Find Boot or Security → Secure Boot and set it to Disabled. Save (usually
F10) and reboot.- If Secure Boot is greyed out, set a Supervisor Password under Security first — that unlocks the option. You can remove the password afterwards.
Enable virtualization (VT-x / SVM) The loader needs hardware CPU virtualization. Enabled in BIOS.
- Enter BIOS/UEFI and open Advanced → CPU Configuration (naming varies by board).
- Enable Intel Virtualization Technology (VT-x) on Intel, or SVM Mode on AMD. Save and reboot.
Disable Hyper-V and Windows virtualization Windows' own virtualization features grab the hypervisor and get in the loader's way. Disabled separately from VT-x.
- Open Control Panel → Programs → Turn Windows features on or off and uncheck Hyper-V, Virtual Machine Platform and Windows Hypervisor Platform.
- Open Command Prompt as administrator, run the command, then reboot:
bcdedit /set hypervisorlaunchtype off - Also turn off Memory Integrity and Application Guard if enabled (see “Disable Core Isolation”).
Disable Core Isolation Memory Integrity blocks the driver from loading. Takes a minute to switch off.
- Open Windows Security → Device security → Core isolation details.
- Turn off Memory Integrity and restart the PC.
Disk in GPT layout If the loader says “Unsupported firmware”, the system disk is MBR and needs converting to GPT.
- Check the layout: Win+R → diskmgmt.msc, right-click the system disk → Properties → Volumes → Partition style. It should read GUID (GPT).
- If it's MBR, convert without data loss: admin Command Prompt, run mbr2gpt /convert /allowfullOS. After converting, switch the BIOS boot mode to UEFI.
Disable Intel RST (Rapid Storage) On some laptops Intel RST mode gets in the loader's way. Switched to AHCI in BIOS.
- In BIOS find SATA Mode / Storage Configuration and switch from Intel RST / RAID to AHCI. Save and reboot.
Use a VPN for download and activation CIS ISPs often block the activation servers. A VPN is needed while downloading the loader, activating the key and injecting — you can turn it off before joining a match.
- Use a full VPN — an app that routes all traffic, not a browser proxy or extension: half the support tickets come from exactly this. In Happ and similar clients turn on TUN mode.
- Turn the VPN on before downloading the loader and activating the key. If something won't load, switch country (Europe or the US usually work).
- After a successful inject you can turn the VPN off before the match to avoid extra ping.
Update Visual C++ and DirectX Up-to-date runtimes keep the loader and overlay from crashing at start.
- Install Visual C++ Redistributable x64 and restart the PC.
- Update DirectX if you haven't in a while.
FAQ
3Where do I get the key after payment?
Why open the radar on a phone?
Can two people watch the radar?
Still stuck?
Run R1XON Checker first — it pinpoints most launch problems in 30 seconds. If it still fails, attach the checker report to your support ticket and we’ll sort it out fast.