Nightvex Radar setup for Arena Breakout: Infinite
Working Medium setup difficulty
The map opens in a browser on a second monitor or a phone. Before the first launch, turn off four Windows protections and reboot.
Requirements
0 of 4 items
Tick what matches your PC:
- Windows 10 or 11 (x64), any build
- Arena Breakout: Infinite from Steam or the official launcher
- Real-time protection, Tamper Protection, Core Isolation and the vulnerable driver blocklist turned off
- A browser: Chrome, Edge or Firefox on a PC, Safari or Chrome on a phone
System requirements
- Operating system Windows 10 or 11 All builds except 26H2
- Processor Intel or AMD
- Graphics card NVIDIA or AMD
- Game mode Any
- Launchers Steam or Arena Breakout Launcher
- Built-in spoofer No
Preparation
Go in order and don't skip the reboot — without it the radar won't start.
0 of 7 steps
Remove third-party antivirus and anti-cheats Kaspersky, Avast, ESET and the like, plus FaceIT and Riot Vanguard, conflict with the loader. They must be uninstalled, not just paused.
- Open Settings → Apps → Installed apps (or Control Panel → Programs and Features).
- Uninstall any third-party antivirus (Kaspersky, Avast, AVG, ESET, 360, Malwarebytes, etc.). Pausing or disabling is not enough — the antivirus driver stays resident.
- Uninstall the FaceIT AC and Riot Vanguard anti-cheats if present — they block third-party software at the kernel level.
- FaceIT is the CS2 anti-cheat, Vanguard is the Valorant one. If you don't play those games, they are safe to remove.
After removing an antivirus, restart the PC — some of its services only unload after a reboot.
Fully disable Windows Defender The #1 cause of “it won't launch”. Disable it for real: manually first, then remove it from startup, reboot, and finish it off with Defender Control.
- Step 1. Turn protection off by hand. Open Windows Security → Virus & threat protection → Manage settings and switch every toggle off:
- Real-time protection — Off.
- Cloud-delivered protection — Off.
- Automatic sample submission — Off.
- Tamper Protection — Off. Turn this one off first, otherwise the others switch themselves back on.
- Step 2. Disable reputation-based protection. In Windows Security → App & browser control → Reputation-based protection → Settings, turn everything off (SmartScreen, potentially-unwanted-app blocking).
- Step 3. Remove Defender from startup. Open Task Manager (Ctrl+Shift+Esc) → Startup apps tab, find Windows Security notification icon and click Disable.
- Step 4. Restart your computer. This is mandatory — some Defender services only unload after a reboot.
- Step 5. Finish with Defender Control. Download Defender Control (archive password: r1xon), run it as administrator and click Disable Windows Defender — the tile turns red.
- If your antivirus deletes the utility itself, protection is still active — go back to step 1. The file ships zipped on purpose so Defender can't wipe it before it's disabled.
Don't skip steps 3–4. “I turned the toggles off but it didn't help” almost always means Defender came back after restart because it was left in startup.
- Turn off real-time protection.
- Settings → Update and Security → Windows Security.
- Virus and threat protection → Manage settings.
- Switch off “Real-time protection”.
- Turn off Tamper Protection in the same section.
- Otherwise Windows re-enables the defenses by itself.
- Turn off Core Isolation — every toggle inside it.
- Windows Security → Device security → Core isolation.
- “Core isolation details” — switch off every item, not just “Memory integrity”.
- Turn off the Microsoft vulnerable driver blocklist.
- The “Microsoft Vulnerable Driver Blocklist” toggle sits in the same Core Isolation section.
- While it is on, Windows blocks part of what the radar needs at system level.
- Reboot the PC:
- A required step: until the reboot the switched-off toggles do not apply.
Launch
0 of 7 steps
- Download the launcher — direct link.
- If you are outside Russia, install and turn on Cloudflare WARP: the launcher does not start without it.
- Run the downloaded application and enter your activation key.
- On the PC open the sign-in page and log into your account.
- On a phone open the direct map link and sign in with the same account.
- Add the page to the home screen — it opens full-screen, like an app.
- Drop into a raid: the map resolves itself in AUTO mode, or pick the location from the list above the map.
- Choose what is visible in the Settings panel — the “Players”, “Bots”, “Items” and “Bodies” groups.
Problems & fixes
8The radar does not start, or the map stays empty
Almost always a skipped preparation step. Check all four toggles — real-time protection, Tamper Protection, the whole of Core Isolation and the vulnerable driver blocklist — and make sure the PC was rebooted after switching them off.
The launcher does not start outside Russia
Install Cloudflare WARP, turn it on and start the launcher again.
Windows protection turns itself back on
Tamper Protection is still on. Open “Virus and threat protection” → “Manage settings”, switch it off, then disable real-time protection again.
Core Isolation refuses to switch off
There are several items inside it, and every one has to be off — not just “Memory integrity”. If a toggle springs back, switch off Tamper Protection first, then repeat and reboot.
The map does not open on a phone
Open the direct link koenflow.com/radar/watch and sign in with the same account you use on the PC. There is no separate app to install.
The radar page keeps loading forever
The first map load can take a while — give it time. If the page still does not open, reload it without cache with
Ctrl + F5.The location does not switch manually
Turn off AUTO first: while it is on, the radar picks the location itself and a manual pick does nothing. Then choose the location in the list above the map.
The launcher does not work after an update
Reinstall the launcher: download a fresh one from the direct link and install it again, otherwise an old version may stay. If that does not help, write to support and attach the newest log file from the
%LOCALAPPDATA%\Nightvex\logs\ folder.FAQ
4Where do I get the key after payment?
The key arrives instantly after payment — it appears on the order page and lands in your email, and with Telegram linked it is duplicated in our bot. This guide opens from there as well.
Can I watch the map on a phone?
Yes, that is a first-class scenario: the map opens in a mobile browser from a direct link, with no separate app. The layout adapts to both landscape and portrait.
Why disable Windows protection if the map is in a browser?
The map itself is drawn by the browser, but the raid data is read by the launcher on your PC. That is what real-time protection, Core Isolation and the driver blocklist get in the way of.
Do I need a spoofer?
It is not included. A spoofer is only needed if the account or the hardware already caught a ban — it can be bought separately from our catalogue.
Still stuck?
Run R1XON Checker first — it pinpoints most launch problems in 30 seconds. If it still fails, attach the checker report to your support ticket and we’ll sort it out fast.